Although installing offroad LED light bar is easy to handle, it is recommended to ask professionals for help. The installation of offroad LED light bar involves automobile lines. It is not recommended to install them by yourself, but to find professionals. When using the car, do not destroy or change the circuit of the original car without permission, which may have some potential safety hazards, or even combustion.
- How to install offroad LED light bar?
- How to refit offroad LED light bar?
- How to clean offroad LED light bar?
How to install offroad LED light bar?
Remember to turn off the engine and cut off the power supply before installation offroad LED light bar. If you have just driven the car, it is necessary to wait for the car to cool down. Open the engine cover and see two dust covers at the lights on both sides, one is the high beam light and the other is the low beam light. Pay attention to the position of the offroad LED light bar.
After unscrewing the dust cover of the low beam lamp, you can see that a plug is inserted into the offroad LED light bar.
Then pull out the plug and press the original spring, which is used to fix the bulb in place.
After pressing the spring, you can easily take out the offroad LED light bar. Here we should remind you to avoid touching the lamp beads on the offroad LED light bar in the process of changing the lamp. Because it is easy to shorten the service life of the lamp. In addition, do not remove the original vehicle bulb immediately after use because it is very hot and easy to burn your hands.
Separate the chuck on the offroad LED light bar and clamp it at the corresponding position. Note that there is a small gap on the chuck. Just align it, and then press the spring pressing plate to fix the chuck.
Insert the lamp into the chuck. At this time, pay attention to the small gap between the chuck and the lamp.
After inserting the offroad LED light bar, you need to rotate and adjust the left and right orientation of the lamp bead, that is, vertical installation. Connect the plug and cover the lampshade.
How to refit offroad LED light bar?
Off-road environment is an activity with extremely high requirements for lighting, especially in some special terrain, such as Gobi and grassland. If theoffroad LED light bar lumen is not enough, it is difficult to see all kinds of water gullies and small fault ridges. It is difficult to drive without sufficient intensity, width and range of offroad LED light bar. This is why it is common for off-road vehicles to refit auxiliary lights.
Light types that can be modified off-road vehicles now have a lot of light types to choose from. From the light source, there are lasers, LEDs, xenon, halogen and so on.
On the premise of similar light sources and coatings, power is the prerequisite to determine the brightness, but the power cannot be increased indefinitely. The importance and difference of auxiliary lamp coating determine the brightness of auxiliary offroad LED light bar. In addition to the diameter of light reflecting bowl and the characteristic of luminous object, the material of lamp surface coating is also a very important part. The choice of color temperature of auxiliary offroad LED light bar is to consider about 4300 to 5000K . Otherwise, it is easy to produce dyeing effect.
How to clean offroad LED light bar?
Wipe with a soft cloth. You can wipe the offroad LED light bar slightly with a rag to remove the floating dust, which can avoid the accumulation of stubborn dust.
Wash with soapy water. Because soapy water is a weakly alkaline substance without corrosivity and has high cleaning ability. Pour the soapy water evenly on the surface of the car headlight for about 10 minutes. Wipe it repeatedly with the sponge eraser to completely remove the dirt and have a certain polishing effect at the same time. you can also try to use toothpaste.
Use sandpaper dipped in water to polish gently. Polish off the aged lampshade layer, then apply a layer of polishing agent. Spray a layer of clear oil for protection.
Foshan Nanhai Ginto Lighting Electrical Co., Ltd not only has lots of self-designed and private items, but also offers OEM/OEM service, such as customized products, customers logo, and packing.
